Letter P - Princesses

Materials:

• (42) Link-O-Loon ® 12 Matte Pastel Pink
• (64) Link-O-Loon ® 12 Metal Dorado
• (104) R-5 Metal Dorado

Instructions:

1. Inflate 7 rings of 4 Link-O-Loon ® 12 Matte Pastel Pink to 15 cm and 5 rings of 4 Link-O-Loon ® 12 Metal Gold at 15 cm.


2. Inflate 4 strips of 6 Link-O-Loon ® 12 to 15 cm. The first two strips in the following color order from top to bottom: 1 Link-O-Loon ® 12 Gold Metal, 4 Link-O-Loon ® 12 Matte Pastel Pink and 1 Link-O-Loon ® 12 Gold Metal. The other two strips in the following color order from top to bottom. bottom: 1 Link-O-Loon ® 12 Matte Pastel Pink, 1 Link-O-Loon ® 12 Gold Metal, 1 Link-O-Loon ® 12 Pastel Matte Pink, 2 Link-O-Loon ® 12 Gold Metal and 1 Link-O-Loon ® 12 Pastel Matte Pink.


3. Inflate 4 strips of 3 Link-O-Loon ® 12 to 15 cm. The first two strips in the following color order from top to bottom: 1 Link-O-Loon ® 12 Matte Pastel Pink, 1 Link-O-Loon ® 12 Gold Metal and 1 Link-O-Loon ® 12 Pastel Matte Pink. The other two strips of 3 Link-O-Loon ® 12 Gold Metal at 15 cm.


4. Inflates 22 connectors of 1 Link-O-Loon ® 12 Gold Metal to 15 cm and 52 pairs of R-5 Gold Metal to 8 cm.


5. Take the first 7 earrings in the following order: 1 Gold, 5 Pink and 1 Gold. Intertwine between each binding a pair of R-5; take the first 4 strips of 6 Link-O-Loon® (note the sequence as shown in the figure) and connects each joint in each pair of the hoop, thus forming a column. On each end of the bottom of the column weaves 4 connectors and then a hoop of 4 Link-O-Loon®. Repeat the same step on the top left side.


6. To get the shape of the letter “P”, interlock 8 connectors from the upper right side. Take two connectors and interlock a pair of R-5s at each end. Take these connectors and tie them to the first and last 2 connectors.


7. Take the 4 strips of 3 Link-O-Loon ® 12 and intertwine them to 2 rings that have pairs of R-5 previously knotted, thus forming a small column. Knot the Links at the ends with each other and intertwine this column on the upper right side using the R-5 connectors and pairs.